Label the diagram below.
Write ONE WORD ONLY from the passage for each answer.
Question 4 - 8
Choose NO MORE THAN TWO WORDS from the passage for each answer.
History of roller coasters
Modern roller coasters are descended from 16th-century Russian slides with a surface of .
People climbed to the top, and travelled down in sleds. In France, because of the higher temperatures, the wooden surface on the slides was and were attached to the cars to ease the descent.
The first US roller coaster was used for transporting down a mountainside in carts. Initially, these were pulled by mules but in time power was produced by .
Question 9 - 13
Do the following statements agree with the information given in the Reading Passage?
TRUE if the statement agrees with the information
FALSE if the statement contradicts the information
NOT GIVEN if it is impossible to say what the writer thinks about this
9
The earliest modifications to the basic slide were made in France.
10
Roller coasters continued to increase in popularity throughout the 1920s and 1930s.
11
New roller coaster technology was introduced in the 1970s in response to public demand.
12
Roller coasters were less popular for most of the 1980s than in the 1970s and 1990s.
13
The design of roller-coaster rides became more varied in the 1990s.
DOL IELTS Đình Lực
📖 Bài đọc (reading passage)
Roller coaster: the great fairground attraction
How they move
A. Like a passenger train, a roller coaster consists of a series of connected cars that move on a track. But unlike a passenger train, it has no engine or power source of its own. For most of the ride, it is moved only by the forces of inertia and gravity. The only exertion of energy occurs at the very beginning of the ride when the coaster train is pulled up the lift hill.
B. The traditional lifting mechanism is a long length of chain running up the hill under the track. The chain is fastened in a loop, which is wound around a gear at the top of the hill and another one at the bottom of the hill. The gear at the bottom of the hill is turned by a motor. This turns the chain so that it continually moves up the hill like a long conveyor belt. The coaster cars grip onto the chain, which simply pulls them to the top of the hill. At the summit, the train is released and starts its descent.
C. The purpose of this initial ascent is to build up a sort of reservoir of potential energy, which simply means that as the coaster gets higher in the air, there is a greater distance gravity can pull it down.
D. As the train starts coasting down the hill, this potential energy is converted into kinetic energy (energy of motion), and the train speeds up. At the bottom of the hill, this has reached its maximum, and this propels the train up the second hill, again building up the potential energy level.
E. In this way, the course of the track is constantly converting energy from kinetic to potential and back again. This fluctuation in acceleration is what makes roller coasters so much fun. At its most basic level, this is all a roller coaster is – a machine that uses gravity and inertia to send a train along a winding track.
Coasting through history
F. Roller coasters have a long, fascinating history. Their direct ancestors were ice slides, popular in Russia in the 16th and 17th centuries. They consisted of a long, steep, wooden slide covered in ice. Riders walked up a ladder or set of stairs to the top of the slide, as high as 21 meters up. At the top, they climbed into sleds made out of wood or blocks of ice and shot down the slope. At the base of the slide, the sleds would crash-land in a sand pile.
G. It seems that the idea was then imported into France. For most of the year, the warmer climate would melt the ice, so the French started building waxed slides instead. To help the sleds move down these slides, they added wheels, and in 1817, for the first time, a train was attached to the track. The French continued to expand on this idea, coming up with more complex track layouts, with multiple cars and all sorts of twists and turns.
H. The first American roller coaster was built in the mountains of Pennsylvania in the mid-1800s originally to provide an easy way to send coal to the railway 29 km down to mountain. When the track was first built, a crew at the bottom of the mountain would attach the cart to a team of mules after emptying the load, and the mules would drag it back up to the top. They were eventually replaced with steam engines, to make the system more efficient.
I. Soon after these improvements were made, the railway company built a new tunnel that brought the freight trains much closer to the coal mine. Now no longer required for its original purpose, the roller coaster was configured as a 'scenic tour'. For one dollar, tourists got a leisurely ride up to the top of the mountain, followed by a wild, bumpy ride straight down. This was soon a resounding success, attracting thousands of tourists every year.
J. Scenic rides like this continued to thrive and were joined by wooden roller coasters similar to the ones we know today. These coasters were the main attraction at popular amusement parks throughout the United States, such as the many parks of Coney Island in New York. By the 1920s, roller coasters were in full swing, with some 2,000 rides in operation around the country. Following the Great Depression, a decline in roller coaster production began in the early 1930s but a second roller-coaster boom in the 1970s and the beginning of the 1980s revitalized the amusement park industry, and introduced a slew of innovative tubular steel coasters.
K. This was followed by a decline in interest for the rest of the decade, but since the early 1990s the amusement-park industry has experienced another coaster boom of sorts. New launching techniques and other technological developments have opened up a world of options for designers so in some rides you feel as if you are flying. In the next few years we can expect to see many faster, taller and more twisted rides popping up in amusement parks around the world.
1
2
3
1
2
3
🔥 Answer key (đáp án và giải thích)
1
chain
Giải thích chi tiết
☺️ Ứng dụng Linearthinking để giải quyết dạng bài Gap Fill
Step 1: Read the question to understand (main idea + detail) + Predict Word Form + Meaning
Câu hỏi yêu cầu chọn đúng bộ phận (1) trong cơ cấu kéo (lifting mechanism) của tàu lượn.
Prediction: Từ cần điền là danh từ số ít(N) → chỉ một bộ phận cơ học dài, dùng để kéo/nâng tàu.
-------
Step 02: Locate relevant information
🔍 Từ khoá: “lifting mechanism” => Dựa vào từ khoá này -> Tìm được trích dẫn ở đoạn B.
-------
Step 03: Read relevant information to understand (main + detail)
📌 Trích dẫn: "The traditional lifting mechanism is a long length of chain running up the hill under the track."
Simplified: the traditional lifting mechanism is a long length of chain running up the hill under the track
-------
Step 04: Compare meaning with meaning
Trong bài đọc: Cơ chế nâng là một sợi xích dài dùng để kéo tàu lên dốc.
Trong câu hỏi: Cơ chế nâng cần một bộ phận cơ học dài, dùng để kéo/nâng tàu.
How they move
A. Like a passenger train, a roller coaster consists of a series of connected cars that move on a track. But unlike a passenger train, it has no engine or power source of its own. For most of the ride, it is moved only by the forces of inertia and gravity. The only exertion of energy occurs at the very beginning of the ride when the coaster train is pulled up the lift hill.
B. The traditional lifting mechanism is a long length of chain running up the hill under the track. The chain is fastened in a loop, which is wound around a gear at the top of the hill and another one at the bottom of the hill. The gear at the bottom of the hill is turned by a motor. This turns the chain so that it continually moves up the hill like a long conveyor belt. The coaster cars grip onto the chain, which simply pulls them to the top of the hill. At the summit, the train is released and starts its descent.
C. The purpose of this initial ascent is to build up a sort of reservoir of potential energy, which simply means that as the coaster gets higher in the air, there is a greater distance gravity can pull it down.
D. As the train starts coasting down the hill, this potential energy is converted into kinetic energy (energy of motion), and the train speeds up. At the bottom of the hill, this has reached its maximum, and this propels the train up the second hill, again building up the potential energy level.
E. In this way, the course of the track is constantly converting energy from kinetic to potential and back again. This fluctuation in acceleration is what makes roller coasters so much fun. At its most basic level, this is all a roller coaster is – a machine that uses gravity and inertia to send a train along a winding track.
Coasting through history
F. Roller coasters have a long, fascinating history. Their direct ancestors were ice slides, popular in Russia in the 16th and 17th centuries. They consisted of a long, steep, wooden slide covered in ice. Riders walked up a ladder or set of stairs to the top of the slide, as high as 21 meters up. At the top, they climbed into sleds made out of wood or blocks of ice and shot down the slope. At the base of the slide, the sleds would crash-land in a sand pile.
G. It seems that the idea was then imported into France. For most of the year, the warmer climate would melt the ice, so the French started building waxed slides instead. To help the sleds move down these slides, they added wheels, and in 1817, for the first time, a train was attached to the track. The French continued to expand on this idea, coming up with more complex track layouts, with multiple cars and all sorts of twists and turns.
H. The first American roller coaster was built in the mountains of Pennsylvania in the mid-1800s originally to provide an easy way to send coal to the railway 29 km down to mountain. When the track was first built, a crew at the bottom of the mountain would attach the cart to a team of mules after emptying the load, and the mules would drag it back up to the top. They were eventually replaced with steam engines, to make the system more efficient.
I. Soon after these improvements were made, the railway company built a new tunnel that brought the freight trains much closer to the coal mine. Now no longer required for its original purpose, the roller coaster was configured as a 'scenic tour'. For one dollar, tourists got a leisurely ride up to the top of the mountain, followed by a wild, bumpy ride straight down. This was soon a resounding success, attracting thousands of tourists every year.
J. Scenic rides like this continued to thrive and were joined by wooden roller coasters similar to the ones we know today. These coasters were the main attraction at popular amusement parks throughout the United States, such as the many parks of Coney Island in New York. By the 1920s, roller coasters were in full swing, with some 2,000 rides in operation around the country. Following the Great Depression, a decline in roller coaster production began in the early 1930s but a second roller-coaster boom in the 1970s and the beginning of the 1980s revitalized the amusement park industry, and introduced a slew of innovative tubular steel coasters.
K. This was followed by a decline in interest for the rest of the decade, but since the early 1990s the amusement-park industry has experienced another coaster boom of sorts. New launching techniques and other technological developments have opened up a world of options for designers so in some rides you feel as if you are flying. In the next few years we can expect to see many faster, taller and more twisted rides popping up in amusement parks around the world.
